HP 345646-001 - StorageWorks NAS 2000s External Storage Server Administration Manual Download Page 155

Page: 155 / 200

Microsoft Services for NFS

155

NAS 2000s Administration Guide

Figure 84: Create a New Share dialog box, General tab

2. In the General tab, enter the share name and path. Check the Unix (NFS) client protocol

check box.

Note:

Uncheck the Microsoft SMB option if you do not want to allow SMB access to

the share.

Note:

NFS service does not support the use of spaces in the names for NFS file shares. NFS

translates any spaces in an export into an underscore character. If you plan to use the same name

when sharing a folder through SMB, and then exporting it through NFS, do not put spaces in the

SMB share name.

To create a folder for the share, check the indicated box and the system will create the
folder at the same time it creates the share.

3. Select the NFS Sharing tab to enter NFS specific information. See “Modifying Share

Properties” for information on this tab.

4. After all share information is entered, click OK.

Deleting a Share

Caution:

Before deleting a share, warn all users to exit that share. Then confirm that no one

is using the share.

Summary of Contents for 345646-001 - StorageWorks NAS 2000s External Storage Server









































































































































































































Search results

Summary of Contents for 345646-001 - StorageWorks NAS 2000s External Storage Server

Reviews:

Related manuals for 345646-001 - StorageWorks NAS 2000s External Storage Server

Brands by name

Popular brands

HP 345646-001 - StorageWorks NAS 2000s External Storage Server, Administration Manual

Search results

Summary of Contents for 345646-001 - StorageWorks NAS 2000s External Storage Server

Reviews:

Related manuals for 345646-001 - StorageWorks NAS 2000s External Storage Server

Brands by name

Popular brands