HP 345646-001 - StorageWorks NAS 2000s External Storage Server Administration Manual Download Page 15

Page: 15 / 200

About this Guide

NAS 2000s Administration Guide

Getting Help

If you still have a question after reading this guide, contact an HP authorized service provider
or access our website:

http://www.hp.com

HP Technical Support

Telephone numbers for worldwide technical support are listed on the following HP website:

http://www.hp.com/support/

. From this website, select the country of origin.

Note:

For continuous quality improvement, calls may be recorded or monitored.

Be sure to have the following information available before calling:

■

Technical support registration number (if applicable)

■

Product serial numbers

■

Product model names and numbers

■

Applicable error messages

■

Operating system type and revision level

■

Detailed, specific questions

HP Storage Website

The HP website has the latest information on this product, as well as the latest drivers. Access
storage at:

http://www.hp.com/country/us/eng/prodserv/storage.html

. From this website, select

the appropriate product or solution.

HP Authorized Reseller

For the name of your nearest HP authorized reseller:

■

In the United States, call 1-800-345-1518

■

In Canada, call 1-800-263-5868

■

Elsewhere, see the HP website for locations and telephone numbers:

http://www.hp.com

Summary of Contents for 345646-001 - StorageWorks NAS 2000s External Storage Server









































































































































































































Search results

Summary of Contents for 345646-001 - StorageWorks NAS 2000s External Storage Server

Reviews:

Related manuals for 345646-001 - StorageWorks NAS 2000s External Storage Server

Brands by name

Popular brands

HP 345646-001 - StorageWorks NAS 2000s External Storage Server, Administration Manual

Search results

Summary of Contents for 345646-001 - StorageWorks NAS 2000s External Storage Server

Reviews:

Related manuals for 345646-001 - StorageWorks NAS 2000s External Storage Server

Brands by name

Popular brands