HP CONFIDENTIAL
File Name: 339674-1.doc Last Saved On: 8/14/03 3:54 PM
58
HP KVM Server Console Switch User Guide
4. In
the
Display Mode
, select
Opaque
for a solid color flag or select
Transparent
to see the desktop through the flag.
5. Position the status flag on the desktop:
a. Click
Set Position
to gain access to the
Position Flag
screen.
b. Left-click and hold the title bar and drag to the desired location.
c. Right-click to return to the
Flag
dialog box.
6. Click
OK
to save settings.
-or-
Click
X
to exit, or press the
Esc
key to exit without saving settings.
NOTE:
Changes made to the position flag are not saved until you click
OK
in the Flag dialog box ("Accessing the Flag Dialog Box" on page
Broadcasting to Servers
Analog users can simultaneously control more than one server in a system to be
sure that all selected servers receive identical input. For each server receiving the
broadcast, you can choose to broadcast keystrokes and mouse movements
independently.
NOTE:
During broadcast, any users connected to a broadcast server
will be disconnected and unable to access any servers.
NOTE:
You can broadcast to only one server per Expansion Module
("Installing the Expansion Module" on page 23) connection.
Broadcasting Keystrokes
The keyboard statistics must be identical for all servers receiving a broadcast to
interpret keystrokes identically. Specifically, the
Caps Lock
and
Num Lock
modes must be the same on all keyboards. While the HP KVM Server Console
Switch attempts to send keystrokes to the selected servers simultaneously, some
servers can inhibit and thereby delay the transmission.
