Managing a power-on password
To set, change, or delete this password, follow these steps:
1.
Open Setup Utility by turning on or restarting the computer, and then pressing
f10
while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select
Security
>
Set Power-On Password
, and then press
enter
.
●
To set a power-on password, type your password in the
Enter New Password
and
Confirm
New Password
fields, and then press
enter
.
●
To change a power-on password, type your current password in the
Enter Current
Password
field, type a new password in the
Enter New Password
and
Confirm New
Password
fields, and then press
enter
.
●
To delete a power-on password, type your current password in the
Enter Current
Password
field, and then press
enter
4 times.
3.
To save your changes and exit Setup Utility, use the arrow keys to select
Exit
>
Exit Saving
Changes
.
Your changes go into effect when the computer restarts.
Entering a power-on password
At the
Enter Password
prompt, type your password, and then press
enter
. After 3 unsuccessful attempts
to enter the password, you must restart the computer and try again.
Using passwords
71
