manualshive.com logo in svg

HP 3100 v2 Series, Command Reference Manual

The HP 3100 v2 Series offers exceptional performance and reliability, and to help maximize your experience, we provide a comprehensive Command Reference Manual. This manual can be easily downloaded for free from our website, ensuring you have the necessary guidance to optimize your product usage.

Share
Download
background image

 

182

 

Parameters 

None

 

Description 

Use 

qinq enable

 to enable basic QinQ on the Ethernet ports.  

Use 

undo qinq enable

 to disable basic QinQ on the Ethernet ports.  

By default, basic QinQ is disabled on Ethernet ports.  

A basic QinQ-enabled port tags received frames with its PVID tag.  

Configured in Layer 2 Ethernet interface view, the command takes effect on the port only. Configured 
in Layer 2 aggregate interface view, the command takes effect on the Layer 2 aggregate interface 
and all the member ports in the aggregation group. Configured in port group view, the command 
takes effect on all ports in the port group.  

Examples 

# Enable basic QinQ on Ethernet 1/0/1.  

<Sysname> system-view 

[Sysname] interface ethernet 1/0/1 

[Sysname-Ethernet1/0/1] qinq enable 

# Enable basic QinQ on all ports in port group 1.  

<Sysname> system-view 

[Sysname] port-group manual 1 

[Sysname-port-group-manual-1] group-member ethernet 1/0/1 to ethernet 1/0/6 

[Sysname-port-group-manual-1] qinq enable 

qinq enable downlink (available only on the HPE 3100 v2 EI) 

Syntax 

qinq enable

 

downlink

 

undo qinq enable 

View 

Layer 2 Ethernet interface view, port group view 

Default level 

2: System level 

Parameters 

None 

Description 

Use 

qinq enable

 

downlink 

to enable selective QinQ on an Ethernet port or a group of Ethernet 

ports. 

Use 

undo qinq enable

 to disable selective QinQ on an Ethernet port or a group of Ethernet ports.  

By default, selective QinQ is disabled on Ethernet ports.  

Configured in Layer 2 Ethernet interface view, the command takes effect only on the interface. 
Configured in port group view, the command takes effect on all ports in the group. 

Examples 

# Enable selective QinQ on port Ethernet 1/0/1. 

<Sysname> system-view 

Summary of Contents for 3100 v2 Series
















































































































































































































































Reviews:

No comments

Related manuals for 3100 v2 Series

3One data IPS7110-2GC-8POE Quick Installation Manual preview
IPS7110-2GC-8POE
Brand: 3One data Pages: 3
Fantech DB10 Installation Instructions preview
DB10
Brand: Fantech Pages: 4
PRO SIGNAL PSG3450 Manual preview
PSG3450
Brand: PRO SIGNAL Pages: 5
Key Digital Champion KD-2X1 Operating Instructions Manual preview
Champion KD-2X1
Brand: Key Digital Pages: 12
LEGRAND C2G 29974 Manual preview
C2G 29974
Brand: LEGRAND Pages: 12
Optical Systems Design OSD2154P Operator'S Manual preview
OSD2154P
Brand: Optical Systems Design Pages: 20
WIKA PSM-700 Operating Instructions Manual preview
PSM-700
Brand: WIKA Pages: 8
Aruba 2930F Series Installation, Safety, And Regulatory Information preview
2930F Series
Brand: Aruba Pages: 6
Contemporary Controls EISK5-100T/H Installation Manual preview
EISK5-100T/H
Brand: Contemporary Controls Pages: 4
A-Neuvideo ANI-H-KIT Instruction Manual preview
ANI-H-KIT
Brand: A-Neuvideo Pages: 28
Edge-Core AS9926-24D Quick Start Manual preview
AS9926-24D
Brand: Edge-Core Pages: 12
JetNet 5018G Series Quick Installation Manual preview
5018G Series
Brand: JetNet Pages: 20
tactio INEO-SU2402G User Manual preview
INEO-SU2402G
Brand: tactio Pages: 2
A-Neuvideo ANI-44VGA Instruction Manual preview
ANI-44VGA
Brand: A-Neuvideo Pages: 9
Abrams ASTRO 400 Installation And Configuration Manual preview
ASTRO 400
Brand: Abrams Pages: 5
Lindy 38088 Manual preview
38088
Brand: Lindy Pages: 7
ANTAIRA Lanolinx LNX-1002GN User Manual preview
Lanolinx LNX-1002GN
Brand: ANTAIRA Pages: 110
CAMDEN Sure-Wave CM-330/N Installation Instructions preview
Sure-Wave CM-330/N
Brand: CAMDEN Pages: 4

Brands by name

Popular brands

Load more brands