manualshive.com logo in svg

HP 3100 Series, Configuration Manual

The Philips 3100 Series product offers innovation and convenience with its advanced features. Access the comprehensive User Manual, containing detailed instructions and helpful tips, for free download on our website. Elevate your experience and unlock the full potential of your Philips 3100 Series by referring to the manual available at manualshive.com.

Share
Download
background image

 

131 

Step Command 

Remarks 

3. 

Add a recognizable OUI 
address. 

voice vlan mac-address oui 
mask oui-mask 

[

 description 

text 

]

 

Optional. 
By default, each voice VLAN has 
default OUI addresses 
configured. For the default OUI 
addresses of different vendors, 
see 

Table 14

. 

4. 

Enter interface view. 

interface

 

interface-type 

interface-number

 

N/A 

5. 

Configure the port to operate 
in manual voice VLAN 
assignment mode. 

undo voice vlan mode auto 

By default, the manual voice 
VLAN assignment mode is 
disabled. 

6. 

Assign the access, trunk, or 
hybrid port in manual voice 
VLAN assignment mode to 
the voice VLAN. 

For the configuration procedure, 
see "

Configuring port-based 

VLANs

."

 

After you assign an access port to 
the voice VLAN, the voice VLAN 
becomes the PVID of the port 
automatically. 

7. 

Configure the voice VLAN as 
the PVID of the trunk or 
hybrid port. 

For the configuration procedure, 
see "

Configuring port-based 

VLANs

."

 

Optional. 
This operation is required for 
untagged inbound voice traffic 
and prohibited for tagged inbound 
voice traffic. 

8. 

Enable voice VLAN on the 
port. 

voice vlan vlan-id enable

 

Disabled by default. 

 

Enabling LLDP to automatically discover IP 
phones 

In a traditional voice VLAN network, the switch maps the source MAC addresses of IP phones to a 
limited number of OUI addresses to allow them to access the network. This method restricts the 
types of IP phones on the network, if the IP phones with the source MAC addresses match the same 
OUI address are categorized as a type. 

To break the restriction, you can enable the switch to automatically discover IP phones through LLDP. 
With this function, the switch can automatically discover the peer, and exchange LLDP TLVs with the 
peer. If the LLDP System Capabilities TLV received on a port shows that the peer can act as a 
telephone, the switch sends an LLDP TLV with the voice VLAN configuration to the peer. 

When the IP phone discovery process is complete, the port will continue the following voice VLAN 
configuration: 

•

 

Join the voice VLAN. 

•

 

Increase the transmission priority of the voice traffic sent from the IP phone.  

To ensure that the IP phone can pass authentication, the device will add the MAC address of the IP 
phone to the MAC address table. 

Configuration prerequisites 

Before you enable the switch to automatically discover IP phones through LLDP, complete the 
following tasks: 

•

 

Enable LLDP globally and on ports. 

•

 

Configure voice VLANs. 

Summary of Contents for 3100 Series


































































































































































































































Reviews:

No comments

Related manuals for 3100 Series

Balluff BNI IOL-727-S51-P012 Assembly Instructions Manual preview
BNI IOL-727-S51-P012
Brand: Balluff Pages: 20
Rack World CAT5 Quick Setting Manual preview
CAT5
Brand: Rack World Pages: 4
H3C S1200 Series Compliance And Safety Manual preview
S1200 Series
Brand: H3C Pages: 90
Cablematic HUB-1230i User Manual preview
HUB-1230i
Brand: Cablematic Pages: 8
Velleman HQ-Power VMS4 Manual preview
HQ-Power VMS4
Brand: Velleman Pages: 5
Eaton STS 2000A Installation And Operation Manual preview
STS 2000A
Brand: Eaton Pages: 120
N-Tron 100-POE4-MDR User Manual & Installation Manual preview
100-POE4-MDR
Brand: N-Tron Pages: 17
Lantech IPES-5222T Series User Manual preview
IPES-5222T Series
Brand: Lantech Pages: 30
S&T kontron KSwitch D3 UM User Manual preview
kontron KSwitch D3 UM
Brand: S&T Pages: 38
Maipu S12800 Installation Manual preview
S12800
Brand: Maipu Pages: 135
hager HIC4 Series Operating Instructions Manual preview
HIC4 Series
Brand: hager Pages: 72
Lanpro SW2400S User Manual preview
SW2400S
Brand: Lanpro Pages: 16
J-Tech Digital JTD-2886 User Manual preview
JTD-2886
Brand: J-Tech Digital Pages: 81
Marmitek Connect TS21 User Manual preview
Connect TS21
Brand: Marmitek Pages: 32
LevelOne IGP-0401 User Manual preview
IGP-0401
Brand: LevelOne Pages: 6
AMBIENTECH TONE-WS Series Installation Instructions preview
TONE-WS Series
Brand: AMBIENTECH Pages: 4
iNels RFJA-12B Manual preview
RFJA-12B
Brand: iNels Pages: 4
Exsys EX-1189HMVS-3 Manual preview
EX-1189HMVS-3
Brand: Exsys Pages: 16

Brands by name

Popular brands

Load more brands