HP 2730p - EliteBook - Core 2 Duo 1.86 GHz Maintenance And Service Manual Download Page 71

Page: 71 / 126

Removal and replacement procedures

Maintenance and Service Guide

4–31

Remove the system board:

1. Turn the computer upside down, with the front toward you.

2. Remove the wireless module compartment shield from the base enclosure. The wireless module compartment

shield is included in the Shield Kit, spare part number 501503-001.

3. Turn the computer right-side up, with the front toward you.

4. Press the ExpressCard slot bezel

to release it from the ExpressCard slot. (The ExpressCard slot bezel is

partially ejected from the ExpressCard slot.)

5. Remove the ExpressCard slot bezel

. The ExpressCard slot bezel is included in the Plastics Kit, spare part

number 501499-001.

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz































































































































Search results

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Reviews:

Related manuals for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Brands by name

Popular brands

HP 2730p - EliteBook - Core 2 Duo 1.86 GHz, Maintenance And Service Manual

Search results

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Reviews:

Related manuals for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Brands by name

Popular brands