HP 2605dtn - Color LaserJet Laser Printer, Reference

Page: 301 / 372

Figure 7-27 Print Modes screen
Clicking Restore Modes and then clicking Apply causes the HP Color LaserJet 2605 series printer to
set all of the print modes to the original factory defaults.
NOTE You must click Apply for your changes to take effect.
The Print Modes screen contains the following sections:
Media Types section
The Media Types section of the Print Modes screen allows users to modify the engine print mode
separately for each media type in the driver. Only one selection can be made for each control. The
following controls are available:
●
Fuser . The fuser temperature control in the engine is a complex algorithm depending on print mode
and print duty cycle. An “increase” or “decrease” in fuser temperature means that the fuser control
ENWW The HP ToolboxFX folders 277
T
h
e HP ToolboxF
X