HP 240 G7 Maintenance And Service Manual Download

Page: 48 / 93

TouchPad button board

Description

Spare part number

TouchPad button board

L23197-001

TouchPad button board bracket

L23193-001

TouchPad button board cable

L23185-001

Before removing the TouchPad button board, follow these steps:

Prepare the computer for disassembly (

Preparation for disassembly on page 26

Remove the bottom cover (see

Bottom cover on page 27

Remove the battery (see

Battery on page 29

Remove the TouchPad button board:

Disconnect the TouchPad ZIF cable from the TouchPad button board (1).

Disconnect the system board ZIF cable from the TouchPad button board (2).

Remove the two Phillips M2.0×2.0 screws (3) that secure the board to the computer.

Lift the bracket from on top of the TouchPad button board (4).

Lift the board and then slide it outward from under the clips that hold it on place to remove it (5).

TIP:

The top edge of the board sits under clips. Be sure to slide the board out from under the clips to

prevent damage to the board or clips.

Reverse this procedure to install the TouchPad button board.

Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for 240 G7






























































































Search results

Summary of Contents for 240 G7

Reviews:

Related manuals for 240 G7

Brands by name

Popular brands

HP 240 G7, Maintenance And Service Manual

Search results

Summary of Contents for 240 G7

Reviews:

Related manuals for 240 G7

Brands by name

Popular brands