HP 170X - JetDirect Print Server, Installation And Configuration Manual

Page: 27 / 80

EtherTalk or LocalTalk Networks (Mac OS) (For J4101B only) 21
Installing the Printer Software
If the HP LaserJet Utility was included on your printer’s
CD-ROM, see your printer documentation for
installation instructions, then skip to the next section
to configure the printer.
If you are installing the HP LaserJet Utility from the
HP JetDirect CD-ROM, use the following installation
instructions.
If you are installing the HP LaserJet Utility from a
source other than the CD-ROM, see the README file
that accompanies the software for installation
instructions.
Automatic virus detection programs might interfere
with the installation of this software. Turn off any
such programs that are active on your Mac OS
computer before proceeding with the installation
process.
1
Insert the CD-ROM into the CD-ROM drive.
2
In the HP Installer window, double-click the installa-
tion icon for the software in the language you want.
3
Follow the instructions on the screen.
For more information about configuring your printer
driver, see the online documentation provided on the
CD-ROM that came with the printer.
Configuring the Printer
The HP LaserJet Utility allows printer settings such as
printer name and preferred zone to be configured
from your Mac OS system. Hewlett-Packard
recommends that only network administrators use the
printer configuration capabilities of this utility.
If this printer is to be serviced by a print spooler, set
up the printer's name and zone before configuring
the spooler to capture the printer.
Running the HP LaserJet Utility
1
With the printer turned on and online, and the print
server connected to the printer and to the network,
double-click the
HP LaserJet Utility
icon.