HP 17-cn0 Series Maintenance And Service Manual Download

Page: 67 / 89

Reverse this procedure to reassemble and replace the display assembly.

Power connector cable

To remove the power connector cable, use this procedure and illustration.

Table 5-14

Power connector cable description and part number

Description

Spare part number

Power connector cable

M50400-001

Before removing the power connector cable, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 32

Remove the bottom cover (see

Bottom cover and rubber feet on page 32

Remove the battery (see

Battery on page 34

Remove the display (see

Display assembly on page 51

Remove the power connector cable:

Disconnect the power connector cable from the system board (1).

Use a tool to release the power connector from the computer (2).

Reverse this procedure to install the power connector cable.

Keyboard with top cover

The top cover with keyboard remains after removing all other spare parts from the computer. In this section,
the first table provides the main spare part number for the top cover/keyboards. The second table provides
the country codes.

Component replacement procedures

Summary of Contents for 17-cn0 Series


























































































Search results

Summary of Contents for 17-cn0 Series

Reviews:

Related manuals for 17-cn0 Series

Brands by name

Popular brands

HP 17-cn0 Series, Maintenance And Service Manual

Search results

Summary of Contents for 17-cn0 Series

Reviews:

Related manuals for 17-cn0 Series

Brands by name

Popular brands