HP 17-ce0001, Maintenance And Service Manual

Page: 60 / 82

Card reader board
Table 5-15 Card reader board description and part number
Description Spare part number
Card reader board L52802-001
Before removing the card reader board, follow these steps:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 26 ).
2. Remove the bottom cover (see Bottom cover and rubber feet on page 27 ).
3. Remove the battery (see Battery on page 30 ).
4. Remove the optical drive (see Optical drive and bezel on page 31 ).
5. Remove the solid-state drive (see Solid-state drive and Optane Memory Module on page 38 ).
6. Remove the system board (see Optical drive and bezel on page 31 ).
Remove the card reader board:
1. Remove the Phillips M2.0 × 3.5 screw (1) that secures the board to the computer.
2. Remove the card reader board from the computer (2).
Reverse this procedure to install the card reader board.
52 Chapter 5 Removal and replacement procedures for authorized service provider parts