HP 17-ce0001 Maintenance And Service Manual Download

Page: 24 / 82

Table 3-1

Computer major components and their descriptions

Item

Component

Spare part number

(1)

Display assembly:

Non-touch

L54269-001

Touch screen

L52653-001

(2)

Keyboard/top cover (includes keyboard cable):

For a detailed list of country codes, see

Keyboard/top cover on page 57

For use in models with stamped finish

L52452-xx1

(3)

TouchPad

NOTE:

The TouchPad spare part kit does not include the TouchPad cable. The TouchPad

cable is available using spare part number L52655-001.

L53699-001

(4)

TouchPad bracket

(5)

Speakers (include left and right speakers and cable)

L52667-001

(6)

Fingerprint reader:

NOTE:

The fingerprint reader spare part kit does not include the cable. The cable is

available using spare part number L52657-001.

For use in models with a stamped finish

L52651-001

(7)

Power connector cable

L52659-001

(8)

Card reader board

L52802-001

(9)

System board (includes processor):

NOTE:

All system board spare part kits include replacement thermal material.

Intel Core i7-8565U processor and 4 GB of discrete graphics memory

L52451-601

Intel Core i7-8565U processor and 2 GB of discrete graphics memory

L52450-601

Intel Core i5-8265U processor and 2 GB of discrete graphics memory

L52449-601

Thermal pad (not illustrated)

L54094-001

(10)

USB board

NOTE:

The USB board spare part kit does not include the cable. The cable is available

using spare part number L52658-001.

L52650-001

(11)

Privacy board

NOTE:

The privacy board spare part kit does not include the cable. The cable is available

using spare part number L53278-001.

L52803-001

(12)

WLAN module (Intel Wireless-AC 9560 802.11ac 2 × 2 Wi-Fi + Bluetooth 5)

L22634-005

(13)

Solid-state drive (M.2):

512 GB, PCIe, Gen 3 × 4

L52457-001

512 GB, PCIe, value

L53277-001

256 GB, PCIe, Gen 3 × 4

L52455-001

256 GB, PCIe, Gen 3 × 2

L52456-001

128 GB, SATA-3, TLC

L52454-001

Chapter 3 Illustrated parts catalog

Summary of Contents for 17-ce0001



















































































Search results

Summary of Contents for 17-ce0001

Reviews:

Related manuals for 17-ce0001

Brands by name

Popular brands

HP 17-ce0001, Maintenance And Service Manual

Search results

Summary of Contents for 17-ce0001

Reviews:

Related manuals for 17-ce0001

Brands by name

Popular brands