HP 17-ap000 Maintenance And Service Manual Download Page 77

Page: 77 / 91

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device

NOTE:

The HP PC Hardware Diagnostics (UEFI) download instructions are provided in English only, and you

must use a Windows computer to download and create the HP UEFI support environment because only .exe files

are offered.

There are two options to download HP PC Hardware Diagnostics to a USB device.

Download the latest UEFI version

Go to

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

In the HP PC Hardware Diagnostics section, select the Download link, and then select Run.

Download any version of UEFI for a specific product

Go to

http://www.hp.com/support

Select Get software and drivers.

Enter the product name or number.

Select your computer, and then select your operating system.

In the Diagnostic section, follow the on-screen instructions to select and download the UEFI version you
want.

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device

Summary of Contents for 17-ap000




























































































Search results

Summary of Contents for 17-ap000

Reviews:

Related manuals for 17-ap000

Brands by name

Popular brands

HP 17-ap000, Maintenance And Service Manual

Search results

Summary of Contents for 17-ap000

Reviews:

Related manuals for 17-ap000

Brands by name

Popular brands