HP 16610A, User Manual

Page: 158 / 171

156
Glossary
G
general-purpose flexible adapter
A cable assembly that connects the
signals from an elastomeric probe
adapter to an analysis probe.
Normally, a male-to-male header or
transition board makes the
connections from the general-
purpose flexible adapter to the
analysis probe.
H
high-density adapter cable A
cable assembly that delivers signals
from an analysis probe hardware
interface to the logic analyzer pod
cables. A high-density adapter cable
has a single Mictor connector that is
installed into the analysis probe, and
two cables that are connected to
corresponding odd and even logic
analyzer pod cables.
high-density termination adapter
cable
Same as a high-density
adapter cable , except it has a
termination in the Mictor connector.
J
jumper Moveable direct electrical
connection between two points.
M
mainframe logic analyzer A logic
analyzer that resides on one or more
board assemblies installed in an
HP 16500, HP 1660-series, or
HP 16600A/700A-series mainframe.
male-to-male header A board
assembly that makes point-to-point
connections between the female pins
of a flexible adapter or transition
board and the female pins of an
analysis probe.
P
preprocessor See analysis probe .
pod A collection of logic analyzer
channels associated with a single
cable and connector.
preprocessor interface See
analysis probe .
probe adapter See elastomeric
probe adapter .
processor probe See emulation
probe .
prototype analyzer The
HP 16505A prototype analyzer acts
as an analysis and display processor
for the HP 16500B/C logic analysis