HP 15 Series, Maintenance And Service Manual, Page: 57 / 105

Solid-state drive
Table 6-5 Solid-state drive descriptions and part numbers
Description Spare part number
256 GB, PCIe, NVMe L20384-001
256 GB, SATA-3, TLC L20382-001
128 GB, SATA-3, TLC L20381-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 33 ).
2. Remove the optical drive (see Optical drive on page 34 ).
3. Remove the bottom cover (see Bottom cover on page 38 ).
4. Remove the battery (see Battery on page 41 ).
Remove the solid-state drive:
▲
Remove the Phillips M2.0 × 3.0 screw (1), and then pull the solid-state drive module from the socket (2).
Reverse this procedure to install the solid-state drive.
Component replacement procedures 47