manualshive.com logo in svg

HP 15 Series, Maintenance And Service Manual, Page: 17 / 105

Share
Download
HP 15 Series Maintenance And Service Manual Download Page 17

Left side

Table 2-2

  Left-side components and their descriptions

Component

Description

(1)

Power connector

Connects an AC adapter.

(2)

 

AC adapter and battery light

●

White: The AC adapter is connected and the battery is fully 
charged.

●

Blinking white: The AC adapter is disconnected and the 
battery has reached a low battery level.

●

Amber: The AC adapter is connected and the battery is 
charging.

●

Off: The battery is not charging.

(3)

RJ-45 (network) jack/status lights

Connects a network cable.

●

White: The network is connected.

●

Amber: Activity is occurring on the network.

(4)

HDMI port

Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio component, 
or a high-speed High-Definition Multimedia Interface (HDMI) 
device.

(5)

USB SuperSpeed ports (2)

Connect a USB device, such as a cell phone, camera, activity 
tracker, or smartwatch, and provide high-speed data transfer.

(6)

Audio-out (headphone)/Audio-in (microphone) 
combo jack

Connects optional powered stereo speakers, headphones, 
earbuds, a headset, or a television audio cable. Also connects an 
optional headset microphone. This jack does not support 
optional standalone microphones.

WARNING!

To reduce the risk of personal injury, adjust the 

volume before putting on headphones, earbuds, or a headset. 
For additional safety information, see the Regulatory, Safety, 
and Environmental Notices.

To access this guide:

▲

Select the Start button, select HP Help and Support, and 
then select HP Documentation.

NOTE:

When a device is connected to the jack, the computer 

speakers are disabled.

Left side

7

Summary of Contents for 15 Series










































































































Reviews:

No comments