manualshive.com logo in svg

HP 15-fb0 Series, Maintenance And Service Manual, Page: 54 / 89

Share
Download
HP 15-fb0 Series Maintenance And Service Manual Download Page 54

3.

Lift the back of the board up, and then pull the board into the computer to remove it (4).

To install the I/O board, reverse this procedure.

Card reader

To remove the card reader, use this procedure and illustration.

Table 6-8

Card reader description and part number

Description

Spare part number

Card reader

N13302-001

Card reader cable

N13303-001

Before removing the card reader, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 36

).

2.

Remove the bottom cover (see 

Bottom cover on page 36

).

3.

Remove the battery (see 

Battery on page 38

).

Remove the card reader board:

1.

Disconnect the cable from the ZIF connector on the system board (1).

2.

Remove the Phillips M2.0 × 4.0 screw (2) that secures the bracket, and then remove the bracket (3).

3.

Remove the two Phillips M2.0 × 2.5 screws (4) that secure the card reader to the computer.

48

Chapter 6  Removal and replacement procedures for authorized service provider parts

Summary of Contents for 15-fb0 Series


























































































Reviews:

No comments