manualshive.com logo in svg

HP 15-dq0000, Maintenance And Service Manual, Page: 48 / 86

Share
Download
HP 15-dq0000 Maintenance And Service Manual Download Page 48

Second display transfer board

NOTE:

The second display transfer board spare part kit does not include the cable. The cable is available as 

spare part number L65580-001.

NOTE:

Liquid metal thermal grease is available as spare part number L65923-001.

Table 6-4

  Second display transfer board description and part number

Description

Spare part number

Second display transfer board

L57230-001

Before removing the second display transfer board, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 26

).

2.

Remove the bottom cover (see 

Bottom cover on page 27

).

3.

Disconnect the battery (see 

Battery and speakers on page 32

).

Remove the second display transfer board:

1.

Disconnect the cable from the ZIF connector on the second display transfer board (1).

2.

Remove the two Phillips M2.0 × 2.5 screws (2) that secure the board to the computer.

3.

Remove the board from the computer (3).

Reverse this procedure to install the second display transfer board

38

Chapter 6   Removal and replacement procedures for authorized service provider parts

Summary of Contents for 15-dq0000























































































Reviews:

No comments