manualshive.com logo in svg

HP 15-dq0000, Maintenance And Service Manual, Page: 13 / 86

Share
Download
HP 15-dq0000 Maintenance And Service Manual Download Page 13

Table 1-1

  Product components and their descriptions (continued)

Category

Description

Audio-out (headphone), audio-in (microphone) combo jack

Stereo microphone input

RJ-45 (network) jack

High-definition multimedia interface (HDMI) v.2.0 supporting up to 4096 × 2160 at 60 Hz

Hot plug/unplug and auto detect for correct output to wide-aspect vs. standard aspect video (auto 
adjust panel resolution to fit embedded panel and external monitor connected)

USB 3.1 Gen 1 Type A ports (3); two on left side, one on right side; supports HP Sleep & Charge

USB 3.1 Gen 2 Type-C port with Thunderbolt™ Gen 3 technology (supports data transfer, power 
delivery, DisplayPort 1.4 out up to 4096 × 2304 [60 Hz] and HDMI 2.0 out through adapter; HDMI 2.0 
out up to 3840 × 2160 (60 Hz) with HDCP 2.2; HP Sleep & Charge)

Internal card expansion

Two M.2 slots for solid-state drive

Keyboard/pointing devices

Keyboard

Full-sized, backlit, Dura-coat, island-style, keyboard

Supports RGB per key lighting adjustable via OMEN Command Center

Supports All Key NKRO

Touchpad requirements

ClickPad with image sensor

Multitouch gestures enabled

Support for Precision Touchpad

Support for modern trackpad gestures

Taps enabled as default

Power requirements

Battery

Supports a 6 cell, 72.9 Wh, 4.5 Ah, polymer battery

Supports battery life enhancement

Supports battery fast charge (30 minutes, 50% charged)

Smart AC adapter (PRC, slim barrel, 7.4 mm)

230 W

Power cord (C13, 1 m, conventional)

Security

Trusted Platform Module (fTPM) 2.0, firmware based

Universal 2nd Factor Authentication (U2F)

Operating system

Preinstalled

Windows® 10 Home 64 Advanced

Windows 10 Home 64 Advanced Single Language

Windows 10 Home 64 Advanced Web/Kiosk

Windows 10 Home 64 High-End Chinese Market CPPP

3

Summary of Contents for 15-dq0000























































































Reviews:

No comments