manualshive.com logo in svg

HP 15-br0xx, Maintenance And Service Manual

Share
Download
HP 15-br0xx Maintenance And Service Manual Download Page 8

Category

Description

Storage (continued)

Single hard drive configurations:

1-TB, 5400-rpm, 7.2-mm hard drive

500-GB, 5400-rpm, 7.0-mm hard drive

Solid-state hard drive configurations:

1-TB, 5400-rpm, 7.2-mm solid-state hard drive with 8-GB NAND

500-GB, 5400-rpm, 7.0-mm solid-state hard drive with 8-GB NAND

Solid-state drive:

Support for M.2 SATA solid-state drive (support for storage function, port 1; not available on computer 
models equipped with an Intel Pentium processor)

Support for Serial Advanced Technology Attachment (SATA)

Support for hard drive and solid-state drive

SATA-3 solid-state drive with Triple-Level Cell (TLC):

●

512-GB

●

256-GB

●

128-GB

M.2 SATA-3 solid-state drive: 256-GB and 128-GB

Dual storage configurations:

1-TB, 5400-rpm, 7.2-mm hard drive with 128-GB M.2 SATA-3 solid-state drive

500-GB, 5400-rpm, 7.0-mm hard drive with 128-GB M.2 SATA-3 solid-state drive

Optical drive

HP external DVD±RW DL SuperMulti Drive

Audio and video

Support for the following cameras:

HP Wide Vision FHD infrared camera with indicator light and 2 infrared lights, USB 2.0, FHD hybrid BSI sensor, 
f2.2, WDR, 88° wide field of vision, 1080p by 30 frames per second

HP Wide Vision HD camera with indicator light, USB 2.0, HD BSI sensor, f2.0, WDR, 88° wide field of vision, 
720p by 30 frames per second

Support for B&O Play

Support for B&O Play Audio Control

Support for dual-array digital microphones with appropriate beam-forming, echo-cancellation, noise-
suppression software

Support for dual speakers

Support for HP Audio Boost

Support for Windows Hello

Sensors

●

Accelerometer (ST Micro HP2DC)

●

Gyroscope/E-compass/Accelerometer (ST Micro HP9DS1)

●

Integrated sensor hub

Wireless

WLAN:

Integrated wireless local area network (WLAN) options by way of wireless module

Two M.2/PCIe WLAN antennas built into display assembly

2

Chapter 1   Product description

Summary of Contents for 15-br0xx














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands