manualshive.com logo in svg

HP 14-ea000, Maintenance And Service Manual, Page: 59 / 88

Share
Download
HP 14-ea000 Maintenance And Service Manual Download Page 59

2.

Remove the rear speakers (2).

Reverse this procedure to install the rear speakers.

Infrared sensor board

To remove the infrared sensor board, use this procedure and illustration.

Table 5-11

  Infrared sensor board description and part number

Description

Spare part number

Infrared sensor board

M22164-001

NOTE:

The infrared sensor board spare part kit does not include the infrared sensor board cable. The infrared sensor board cable is 

available using spare part number M22151-001.

Before removing the infrared sensor board, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 37

).

2.

Remove the bottom cover (

Bottom cover on page 37

).

3.

Remove the battery (see 

Battery on page 38

).

4.

Remove the system board (see 

System board on page 46

).

Remove the infrared sensor board:

1.

Remove the two Phillips M2.0 × 1.8 broad head screws (1) that secure the infrared sensor board to the top 
cover.

ENWW

Component replacement procedures

53

Summary of Contents for 14-ea000

























































































Reviews:

No comments