manualshive.com logo in svg

HP 14-ea000, Maintenance And Service Manual, Page: 57 / 88

Share
Download
HP 14-ea000 Maintenance And Service Manual Download Page 57

3.

Remove the battery (see 

Battery on page 38

).

4.

Remove the system board (see 

System board on page 46

).

Remove the connector board cable:

1.

Release the ZIF connector (1) to which the connector board cable is connected, and then disconnect the 
connector board cable from the connector board.

2.

Remove the connector board cable (2).

Reverse this procedure to install the connector board cable.

Connector board

To remove the connector board, use this procedure and illustration.

Table 5-9

  Connector board description and part number

Description

Spare part number

Connector board

M22163-001

NOTE:

The connector board spare part kit does not include the connector board cable. The connector board cable is available usiung 

spare part number M22150-001.

Before removing the connector board, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 37

).

2.

Remove the bottom cover (

Bottom cover on page 37

).

3.

Remove the battery (see 

Battery on page 38

).

4.

Remove the system board (see 

System board on page 46

).

Remove the connector board:

ENWW

Component replacement procedures

51

Summary of Contents for 14-ea000

























































































Reviews:

No comments