HP 14-ea000, Maintenance And Service Manual, Page: 51 / 88

3. Detach the touchpad cable (3) from the top cover and touchpad. (The touchpad cable is attached to the top
cover and touchpad with double-sided adhesive at two locations.)
4. Remove the touchpad cable.
Reverse this procedure to install the touchpad cable.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 5-6 Touchpad descriptions and part numbers
Description Spare part number
Touchpad:
In natural silver finish M22166-001
In nightfall black finish M22165-001
In Poseidon blue finish M22167-001
NOTE: The touchpad spare part kit does not include the touchpad cable. The touchpad cable is available using spare part number
M22152-001.
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 37 ).
2. Remove the bottom cover ( Bottom cover on page 37 ).
3. Remove the battery (see Battery on page 38 ).
Remove the touchpad:
ENWW Component replacement procedures 45