HP 10500 series, Security Configuration Manual, Page: 270 / 596

256
Requesting a certificate from an RSA Keon CA server
Network requirements
Configure the PKI entity (the device) to request a local certificate from the CA server.
Figure 79 Network diagram
Configuring the RSA Keon CA server
1. Create a CA server named myca :
In this example, you must configure these basic attributes on the CA server:
{
Nickname —Name of the trusted CA.
{
Subject DN —DN attributes of the CA, including the common name (CN), organization unit
(OU), organization (O), and country (C).
You can use the default values for other attributes.
2. Configure extended attributes:
Configure parameters in the Jurisdiction Configuration section on the management page of
the CA server:
{
Select the correct extension profiles.
{
Enable the SCEP autovetting function to enable the CA server to automatically approve
certificate requests without manual intervention.
{
Specify the IP address list for SCEP autovetting.
Configuring the device
1. Synchronize the system time of the device with the CA server for the device to correctly request
certificates or obtain CRLs. (Details not shown.)
2. Create an entity named aaa and set the common name to Device .
<Device> system-view
[Device] pki entity aaa
[Device-pki-entity-aaa] common-name Device
[Device-pki-entity-aaa] quit
3. Configure a PKI domain:
# Create a PKI domain named torsa and enter its view.
[Device] pki domain torsa
# Specify the name of the trusted CA. The setting must be the same as CA name configured on
the CA server. This example uses
myca .
[Device-pki-domain-torsa] ca identifier myca
# Configure the URL of the CA server. The URL format is http:// host:port / Issuing Jurisdiction ID ,
where Issuing Jurisdiction ID is a hexadecimal string generated on the CA server.
[Device-pki-domain-torsa] certificate request url
http://1.1.2.22:446/80f6214aa8865301d07929ae481c7ceed99f95bd
# Configure the device to send certificate requests to ca .
[Device-pki-domain-torsa] certificate request from ca
# Set the PKI entity name to aaa .