248
Step Command
Remarks
11.
(Optional.) Specify
the intended use for
the certificate.
usage
{
ike
|
ssl-client
|
ssl-server
} *
By default, the certificate can be
used by both SSL clients and SSL
servers.
The extension options contained
in an issued certificate depend on
the CA policy, and they might be
different from those specified in
the PKI domain.
The device does not support the
ike
keyword in the current
software version.
12.
(Optional.) Specify a
source IP address for
the PKI protocol
packets.
•
Specify the source IPv4 address for
the PKI protocol packets:
source ip
{
ip-address
|
interface
{
interface-type interface-number
}
•
Specify the source IPv6 address for
the PKI protocol packets:
source ipv6
{
ipv6-address
|
interface
{
interface-type
interface-number
}}
This task is required if the CA
policy requires that the CA server
accept certificate requests from a
specific IP address or subnet.
By default, the source IP address
of PKI protocol packets is the IP
address of their outgoing
interface.
Requesting a certificate
To request a certificate, a PKI entity must provide its identity information and public key to a CA.
A certificate request can be submitted to a CA in offline or online mode.
•
Offline
mode
—A certificate request is submitted by using an out-of-band method, such as
phone, disk, or email. You can use this mode as required or if you fail to request a certificate in
online mode.
To submit a certificate request in offline mode:
a.
Use
pki request-certificate domain pkcs10
to print the request information on the
terminal or use
pki request-certificate domain pkcs10 filename
to save the request
information to a local file.
b.
Send the printed information or the saved file to the CA by using an out-of-band method.
•
Online
mode
—A certificate request can be automatically or manually submitted. This section
describes the online request mode.
Configuration guidelines
The following guidelines apply to certificate request for an entity in a PKI domain:
•
Make sure the device is time synchronized with the CA server. Otherwise, the certificate request
might fail because the certificate is considered to be outside of the validity period. For
information about how to configure the system time, see
Fundamentals Configuration Guide
.
•
To request a new certificate for a PKI entity that already has a local certificate, perform the
following tasks:
a.
Use the
pki delete-certificate
command to delete the existing local certificate.
b.
Use the
public-key local create
to generate a new key pair. The new key pair will
automatically overwrite the old key pair in the domain.
c.
Submit a new certificate request.
Summary of Contents for 10500 series
Page 326: ...312 No duration limit for this SA ...
