218
Step Command
Remarks
7.
Set the maximum number of
history password records for
each user.
password-control history
max-record-num
The default setting is 4.
8.
Configure the login attempt
limit.
password-control login-attempt
login-times
[
exceed
{
lock
|
lock-time
time
|
unlock
} ]
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for
1 minute before trying again.
9.
Set the number of days
during which a user is
notified of the pending
password expiration.
password-control
alert-before-expire
alert-time
The default setting is 7 days.
10.
Set the maximum number of
days and maximum number
of times that a user can log
in after the password
expires.
password-control
expired-user-login delay
delay
times
times
By default, a user can log in three
times within 30 days after the
password expires.
11.
Set the maximum account
idle time.
password-control login
idle-time
idle-time
The default setting is 90 days.
Setting user group password control parameters
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a user group and
enter user group view.
user-group
group-name
By default, no user group exists.
For information about how to
configure a user group, see
"
."
3.
Configure the password
expiration time for the user
group.
password-control aging
aging-time
By default, the password
expiration time of the user group
equals the global password
expiration time.
4.
Configure the minimum
password length for the user
group.
password-control length
length
By default, the minimum
password length of the user group
equals the global minimum
password length.
5.
Configure the password
composition policy for the
user group.
password-control composition
type-number
type-number
[
type-length
type-length
]
By default, the password
composition policy of the user
group equals the global password
composition policy.
6.
Configure the password
complexity checking policy
for the user group.
password-control complexity
{
same-character
|
user-name
}
check
By default, the password
complexity checking policy of the
user group equals the global
password complexity checking
policy.
7.
Configure the login attempt
limit.
password-control login-attempt
login-times
[
exceed
{
lock
|
lock-time
time
|
unlock
} ]
By default, the login-attempt
policy of the user group equals
the global login-attempt policy.
Summary of Contents for 10500 series
Page 326: ...312 No duration limit for this SA ...
