To replace the component:
8.
Install the serial port interface.
9.
Connect the cable.
10.
Install the riser.
Removing and replacing an SFF power switch module
Procedure
1.
Power down the server (
on page 36).
2.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
on page 37).
• Remove the server from the rack (
Remove the server from the rack
on page 37).
3.
Remove the access panel (
on page 39).
4.
Disconnect cables from the power switch module.
5.
Remove the power switch module.
To replace the component, reverse the removal procedure
Removing and replacing an SFF power switch module
69
Summary of Contents for ProLiant DL380
