Removing and replacing the LFF backplane assembly
Procedure
1.
Power down the server (
on page 36).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
• Remove the server from the rack (
Remove the server from the rack
on page 37).
4.
Remove the access panel (
on page 39).
5.
Remove the fan cage (
Removing and replacing the fan cage
on page 52).
6.
on page 40).
7.
Disconnect all cables connected the LFF backplane assembly.
8.
Remove the LFF backplane assembly.
To replace the component, reverse the removal procedure.
Removing and replacing a front LFF drive backplane
Procedure
1.
Power down the server(
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
on page 37).
• Remove the server from the rack (
Remove the server from the rack
on page 37).
4.
Remove the access panel (
on page 39).
5.
Remove the fan cage (
Removing and replacing the fan cage
6.
7.
Disconnect all cables connected the LFF backplane assembly.
Removing and replacing the LFF backplane assembly
65
Summary of Contents for ProLiant DL380
