To replace the component, reverse the removal procedure.
Removing and replacing the 2-SFF rear drive bay and riser
cage
Procedure
1.
Power down the server (
on page 36).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
• Remove the server from the rack (
Remove the server from the rack
on page 37).
4.
Remove the access panel (
on page 39).
5.
on page 40).
6.
Disconnect all cables from the drive backplane.
7.
Remove the drive cage.
60
Removing and replacing the 2-SFF rear drive bay and riser cage
Summary of Contents for ProLiant DL380
