8.
Install the TPM security rivet by pressing the rivet firmly into the system board.
9.
.
11.
Do one of the following:
• Slide the server into the rack.
•
Install the server into the rack
.
12.
Connect each power cord to the server.
13.
Connect each power cord to the power source.
15. If removed, install the security bezel
.
Retaining the recovery key/password
The recovery key/password is generated during BitLocker setup, and can be saved and printed after
BitLocker is enabled. When using BitLocker, always retain the recovery key/password. The recovery key/
password is required to enter Recovery Mode after BitLocker detects a possible compromise of system
integrity.
To help ensure maximum security, observe the following guidelines when retaining the recovery key/
password:
80
Retaining the recovery key/password
