HP Enterprise ProLiant DL20 Gen9, User Manual, Page: 60 / 124

16. Install the access panel .
17. Do one of the following:
• Slide the server into the rack.
•
Install the server into the rack .
18. Connect each power cord to the server.
19. Connect each power cord to the power source.
20. Power up the server .
21. If removed, install the security bezel .
Installing two M.2 SSDs
For more information about the integrated storage controller and its features, select the relevant user
documentation on the
Hewlett Packard Enterprise website .
Procedure
1. If installed, remove the security bezel .
2. Power down the server .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
• Extend the server from the rack .
• Remove the server from the rack .
5. Remove the access panel .
6. Remove the PCI riser cage .
7. Select the appropriate PCIe slot to install the M.2 SSD enablement board and remove the PCIe blank.
• Slot 1
60 Installing two M.2 SSDs