Important Notes:
Do not use a power driver for this product installation
Ensure packaging is disposed of in a safe environmentally friendly way
Installation into a 600mm cabinet required which has been secured to the wall
Cabinet door(s) must be able to open fully for the pull down mechanism to operate
This mechanism has moving parts and care must be taken when operating.
Only use the handle to pull down.
Care must be taken when pulling the shelving up and down. Hold the handle until fully extended or retracted.
600mm Pull Down Shelving
HD417081
HYH1323
Installation Overview
HYH1323
Fit the shelf racks to the LH side panel aligning the rack
with the holes. Secure in 4 positions with screws.
*Lever adjustment required dependent upon weight. Set to heavy for installation (see operation information)
1
Fit the handle bar slotting it into position.
2
Storage load: Up to 9kgs*
Assembly
600mm
564mm
409mm
18mm
442mm
19mm
270mm
290mm
412mm
614.5mm 684mm
720mm
18mm
Handle
Bar x1
LH Side Panel x1
Screw x4
(4x16mm)
Washer x4
Note: Make sure the
slot is located
270mm
Shelf Racks x2
