Hove ONE ver. 1, Manual, Page: 6 / 20

Hove ONE ver. 1 Manual 2021-03-01 Rev. 1.0 5 / 19
•
If the machine is equipped with the Hove ground failure detection feature,
the high voltage components of the machine will be switched off until a
safety earth connection is detected. The PE wire in the power cord must be
connected to safety earth. Other safety earth connections are not detected!
o
Indicator for LED for Ground Failure Detection:
RED: Safety Earth Connection missing
GREEN: Safety Earth Connection detected
On delivery of the machine
•
Immediately check the packaging and machine for shipping damage. Do not
use the machine if damaged. Contact Hove A/S.
•
Dispose of packaging material according to applicable regulations.
•
Read the instruction manual carefully. It contains important information
about the use and maintenance. Keep the instruction manual for future
reference.
When using the machine for the first time
Cleaning the machine
•
Clean the Hove ONE to prevent any contamination of grease or pump.
•
As described under “ Assembly ”, f lush the pump through with 300 grams of
the desired type of grease before initial start. The machine's functions have
been thoroughly checked at the factory. This may be the cause of small
remaining quantities of grease in the machine. The flushing ensures the
removal of any remaining grease and it gives the opportunity to test the
machine's functions before using it for lubrication applications.
Assembly
•
Open the lid (B).
o
On models with cartridge turn on coupling:
Dismantle the dust cap by turning the lock lever (D) fully
counter clockwise
o
On models with cartridge push on coupling:
Pull off the dust cap