background image

17

Maintenance

Hotsy HWE Operator’s Manual  8.941-225.0 - Y

Preventative Maintenance

This pressure washer was produced with the best available materials and quality craftsmanship. However, you as 
the owner, have certain responsibilities for the correct care of the equipment. Attention to regular preventative main-
tenance procedures will assist in preserving the performance of your equipment. Contact your Hotsy dealer for 
maintenance. Regular preventative maintenance will add many hours to the life of your pressure washer. Perform 
maintenance more often under severe conditions.

Oil Change Record

Check pump oil level before first use of your new Power Washer. Change pump oil after first 50 hours and every 
year or 500 hours thereafter. Use SAE 10/40W non-foaming oil.

Maintenance Schedule

Pump Oil (Non-foaming) SAE 10W-40

Inspect

Oil level daily

Change

After first 50 hours, then every 500 hours or annually

Replace High Pressure Nozzle

Every 6 months

Replace Quick Connects

Annually

Clean Water Screen/Filter

Weekly

Replace HP Hose

Annually

Grease Motor

Every 10,000 hours

Inspect Heater Module Tank Water Level 

Weekly

Date Oil Changed                   

Month/Day/Year

Estimated Operating 
Hours Since Last Oil 

Change

Date Oil Changed                   

Month/Day/Year

Estimated Operating 
Hours Since Last Oil 

Change

Summary of Contents for HWE-4020C





















































Reviews: