Hotset GmbH
99
Start-up-, Service- and Operation Manual hotcontrol cDT+
Rev. 1.00.05
Subject to technical changes
14.1.6Communication
[A] System parameter list; the list is cir-
culating.
[B] The selected system parameter out
of the system parameter list is displayed
in the parameter field upper left.
[C] By the displayed numeric keypad the
specification of the new value for the se-
lected parameter field can be done.
Further details on data entry see chapter
For further details on system parameters see Manual Parameters
hotcontrol cDT+
.
Quit dialog
Description
Each
hotcontrol cDT+
hot runner controller is delivered with a standard setting of
parameters.
Furthermore, the user can adapt the system to individual requirements by
communication parameters.
How it works
Call by key in Infocenter. Specify communication parameters, which are unique and
zone independent.
What good is it
Simple adaptation of
hotcontrol cDT+
hot runner controllers e.g. at integration in
company networks.
Setting by
Key in Infocenter
For further details on parameters ([P***], [SP**], [CP**]) see Manual Parameters
hot-
control cDT+
.
Whether and which keys are activated for the user, see chapter
Display Infocenter by
15) in the header over screen edge
Communication parameter
B
C
A
