8
Chapter 3
Security References
Rev. 1.00.05
Subject to technical changes
3
Security References
For the hot runner controller
hotcontrol cDT+
hereinafter referred to as device (consisting of see
(page 177)), the following safety instructions must be observed.
3.1
Security References for User
All persons, responsible for the mounting/start-up/operation/maintenance/servicing of the device, have to
be skilled appropriately
consider this start-up, service and operation manual exactly
regard this start-up, service and operation manual as part of the product
keep this start-up, service and operation manual during lifetime of the product
pass this start-up, service and operation manual to all successive owners or operators of the product
make sure, that every obtained amendment is integrated in this start-up, service and operation manual.
Please note the following safety instructions necessarily for protection against electric shock, risks of injuries and
fire.
At start-up, adhere strictly to the local safety regulations as well as the safety instruction.
Consider the regulations for prevention of industrial accidents for electrical installations and equipment by govern-
ment safety organization in industrial facilities.
Do not throw packaging material careless away, thermoplastic foil/ styrofoam parts etc. may get dangerous for
persons.
Protect device against moisture. Do not use in areas with high humidity.
Check, that the specified voltage on the type plate is identical with the mains voltage on-site.
Ensure that the power cord and the connecting cables are not damaged by overrun, squeezing, tearing or suchlike.
Protect the cords/cables against oil, sharp edges and temperatures above 70 °C.
Do not touch the mains plug with wet hands.
Lock the connected counter plug on the rear side of the device with retaining brackets against accidental removal.
Connect the connecting cable only in de-energized status.
Place the connecting cable to prevent stumbling.
Assure yourself that the e.g. connected injection mold is linked to the protective conductor.
Do not place any tanks, filled with liquid, on the top of the device, otherwise a dangerous situation may emerge.
The device is set up so that the main switch is easily accessible so that in emergency, the machine can be shut
down quickly.
Before installation, handling or operation of the device, please read through this start-up, ser-
vice and operation manual completely and carefully.
