Indesit Company SpA
Viale Aristide Merloni, 47
60044 Fabriano (AN), Italy
www.indesitcompany.com
EN
TR
Operating instructions
Kullanma talimatları
10
5
TM VPL JW0
TM VMT JX0
TM VPL JR0
9
X
2
7
8
2
3
4
10
5
6
1
hotpoint.
eu
13
en
lowed to get lime dissolved and then the boiler is
emptied. Please remember to rinse the unit fresh
water.
After boiling a certain amount of water the switch
is turned off, commercially decalcifies or some
vinegar are added to water and some time is al-
TROUBLESHOOTİNG
Problems
It does not
boil water.
It boils
It delays
heating
water.
On-off
switch does
not work.
Possible Causes
•
Boiler, boiling switch,
on-off switch or
energy transmitting
contacts may have
failed.
•
Boiling switch and
on-off switch are not
in “on” position.
•
Because of little
water, safety
thermostat has
operated to prevent
the unit from starting.
•
Lid or teapot is not
on the kettle
•
Boiling switch has
failed.
•
Excess lime on the
kettle base
•
Boiling switch is not
in boiling position
•
Excess lime on the
kettle base
Solutions
•
Contact technical service.
•
Take the boiling switch and on-off switch to
“on” position.
•
Wait until the unit to cool down or add cold
water.
•
Close the lid of boiler or place the teapot on
the kettle.
•
Contact technical service.
•
Clean the lime in the equipment as described
in the user’s manual.
•
When on-off switch is in “on” position, take
the boiling switch to boiling position.
•
Clean the lime in the equipment as described
in the user’s manual.
