Hotpoint HD5G00CCBK/UK, Instructions For Installation And Use Manual

Page: 12 / 24

Electronic Ignition for the Gas Hob
To light a specific burner push the corresponding
knob all the way in and turn it counter-clockwise to
maximum
maximum maximum maximum maximum keeping it pressed down until the
burner lights.
Important: Should the burner flames
Important: Should the burner flames Important: Should the burner flames Important: Should the burner flames Important: Should the burner flames
accidentally go out, turn off the control knob
accidentally go out, turn off the control knob
accidentally go out, turn off the control knob accidentally go out, turn off the control knob accidentally go out, turn off the control knob
and wait at least 1 minute before trying to
and wait at least 1 minute before trying to
and wait at least 1 minute before trying to and wait at least 1 minute before trying to and wait at least 1 minute before trying to
relight.
relight. relight. relight. relight.
Control Knobs for the gas burners
The position of the gas burner controlled by each
one of the knobs is shown by a solid ring

. To
light one of the burners, press down and turn the
corresponding knob counter clockwise to the
maximum
maximum
maximum maximum
maximum setting. Each burner can be operated
at its maximum, minimum or intermediate power.
Shown on the knob are the different symbols for off

(the knob is on this setting when the symbol
corresponds with the reference mark on the control
knobl), for maximum
maximum maximum maximum maximum and minimum minimum minimum minimum minimum ..... To obtain
these settings, turn the knob counter clockwise with
respect to the off position. To turn off the burner,
turn the knob clockwise until it stops (corresponding
again with the

symbol).
Since the hob burners are equipped with a safety
device, you must hold the control knob in for about
3-7 seconds after the burner has been lighted to
allow the gas to pass until the safety thermocouple
has heated.
HOB GAS BURNER
SAFETY DEVICE
ELECTRONIC
LIGHTING DEVICE
Burner and Nozzle
Specifications
S S
R A
* At 15°C and 1013 mbar- dry gas
** Propane P.C.S. = 50,37 MJ/Kg
Table 1 Liquid Gas Natural Gas
Burner Diameter Thermal Power
kW (p.c.s.*)
By-Pass
1/100
Nozzle
1/100
Flow*
g/h
Thermal Power
kW (p.c.s.*)
Nozzle
1/100
Flow*
l/h
(mm) Nominal Reduced (mm) (mm) *** ** Nominal Reduced (mm)
Fast
(Large)(R)
100 94 3,00 0,7 41 87 218 214 3,00 0,7 128 286
Semi Fast
(Medium)(S)
75 69 1,90 0,4 30 70 138 136 1,90 0,4 104 181
Auxiliary
(Small)(A)
51 46 1,00 0,4 30 52 73 71 1,00 0,4 76 95
Main Oven - - 2,50 0,6 34 71 182 179 2,50 0,6 115 238
Grill - - 3,60 2,4 - 94 167 164 3,60 1,4 134 219
Top Oven - - 2,00 0,6 34 66 145 143 2,00 0,6 104 (X) 190
Supply
Pressures
Nominal (mbar)
Minimum (mbar)
Maximum (mbar)
28-30
20
35
37
25
45 20
17
25
*** Butane P.C.S. = 49,47 MJ/Kg
Natural P.C.S. = 37,78 MJ/m
3
12
EN
HD5G00CCX/UK
HD5G00CCW/UK HD5G00CCW/UK HD5G00CCW/UK HD5G00CCW/UK
HD5G00CCX/UK
HD5G00CCX/UK HD5G00CCX/UK
HD5G00CCBK/UK HD5G00CCBK/UK HD5G00CCBK/UK
!
This procedure must be performed by a qualified
technician who has been authorised by the
manufacturer.
HD5G00CCSS/UK HD5G00CCSS/UK HD5G00CCSS/UK