background image

8

GB

Control panel

PROGRAMMES

Knob

Indicator

ON/OFF

Button

OPTION

Buttons & Lights

START/PAUSE
Button & Light

Empty Water
Light

Clean Filter
Light 

Clean Condenser 
Light

Progress or Delay 

Lights

The ON/OFF button 

 : If the dryer is running and this 

button is pressed and held for more that 3 seconds the 
dryer is turned off, the programme is then cancelled. 
Press and hold for more than 3 seconds and the dryer 
reactivates.

The 

PROGRAMMES 

knob sets the programme: rotate it 

until the indicator is pointing to the programme you want to 
select or to Timed Drying 

(see Start and Programmes)

.

Use the 

DRYING LEVELS

 knob to set your required 

dryness sensing level, or the 

TIMED DRYING

 knob to 

select a drying time 

(see Start and Programmes)

.

The 

OPTION

 buttons/lights select available options for 

your selected programme. The lights indicate that the 
option has been selected 

(see Start and Programmes).

The 

START/PAUSE

 button/light 

 starts a selected 

programme. When you press this button there will be 
one beep and the progress lights will fl ash to confi rm 
the action. When a programme is running, pressing this 
button in pauses the programme and stops the dryer. The 
light is green when programme is running, fl ashing amber 
if the programme has been paused or fl ashing green if 
on standby waiting to start a programme 

(see Start and 

Programmes).
Note:

 This light also fl ashes amber during the Post

Care phase of a programme.

The 

Progress or Delay

 lights show you the status of the 

programme, or the delay time when they fl ash. During a 
delayed start the lights fl ash to show the delay selected. 
When (not fl ashing) they show each  stage of the 
programme by the corresponding light turning on 

(see Start 

and Programmes).

The 

Empty Water 

indicator light signals that the water 

container should be emptied. The light will take a few 
seconds to go out after replacing the empty water 
container, the dryer must be running for this to happen 

(see 

The Controls).
Note:

 If the water bottle fi lls the indicator light fl ashes, the 

heat is turned off and your clothes will not dry.

The 

Clean Filter

 light gives you a reminder before every 

programme that it is essential to clean the fi lter every time 
the dryer is used 

(see Maintenance and Care).

The 

Clean Condenser

 light gives you a reminder that

it is essential to clean the condenser at regular intervals

(see Maintenance and Care).

DRYING LEVELS
Knob

TIMER 
DRYING
Knob

Summary of Contents for FTCL 87

















Reviews: