Hotpoint FP 1005 AX0, Operating Instructions Manual

Page: 24 / 148

24
it en
- bed&breakfast-type environ-
ments.
• supervise children to prevent
them from playing with the appli-
ance.
• Turn unit off and unplug from out-
let when not in use, before put-
ting on or taking off parts, and
before cleaning. To disconnect,
turn unit off, grasp plug, and pull
out from wall outlet. Never yank
on cord.
• Do not operate any appliance
with a damaged cord or plug or
after the appliance malfunctions
or has been damaged in any
manner. Return the appliance to
an authorized service facility for
examination, repair, or electrical
or mechanical adjustment.
• Do not leave the appliance unat-
tended while it is running.
• Blades are sharp. Handle care-
fully. Be sure to insert or remove
Chopping Blade and slice/shred
Disc by touching non-cutting
edges to avoid injuries.
• Connect and operate the appliance only in ac-
cordance with the specifications on the rating
plate.
• Read all instructions. Keep these instructions for
future use.
• To protect against risk of electrical shock, do not
immerse base, cord, or plug in water or other liq-
uid.
• If the power is interrupted, the appliance remains
switched on and restarts when the power is re-
stored.
• Avoid contacting moving parts and keep fingers
out of discharge opening.
• To prevent injury, repairs such as replacing a
damaged cord should only be carried out by our
customer service.
• The use of attachments not recommended or sold
by the appliance manufacturer may cause fire,
electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter
or touch hot surfaces.
• Keep hands and utensils away from moving
blades or Discs while processing food to prevent
the possibility of severe personal injury or dam-
age to the food processor. A scraper may be used
but must be used only when the food processor
is not running.
• To avoid injury, never place Chopping Blade or
Slice/Shred Disc on Base without first putting
Bowl properly in place. Make sure motor, Disc,
and/or Chopping Blade have stopped completely
before removing cover.
• Be certain cover is securely locked in place before
operating appliance.
• Never feed food into chute by hand. Always use
Food Pusher.
• Do not operate this appliance in the presence of
explosive and/or flammable fumes.
• Do not attempt to override the cover interlock
mechanism.
• To reduce the risk of electric shock, do not attempt
to remove the bottom cover. There are no user
serviceable parts inside. Repair should be done
only by authorized personnel.
• For your protection, this unit has an interlock sys-
tem so the processor won’t operate unless the
Bowl is locked onto the Base and the Cover is
correctly locked onto the bowl. Be sure the Big
Food Pusher on the Bowl Lid is also in the lock
position. Do not attempt to operate the unit with-
out the Bowl lid, Bowl and Big Food Pusher being
correctly in place. Be sure the Base is on a flat,
dry and clean surface before you begin process-
ing.
•
befORe fIRsT Use
• When unpacking the product and removing pack-
ing material, handle the Chopping Blade, and
slice/shred Disc carefully; they are very sharp.
• Wash all parts except the Base in hot, soapy
water. Rinse them dry. These parts can also be
placed in the dishwasher. Be sure to read this Use
& Care Book, paying special attention to the sec-
tions on “How to Use” and “Care and Cleaning” to
learn the correct methods for taking the unit apart
and cleaning.