ELECTRONIC CLOCK & AUTOMATIC OVEN
TIMER OPERATION
SETTING THE TIME OF DAY
Step 1
Make sure all oven controls are turned Off.
Step 2
Check the electricity supply to the cooker is turned on.
Step 3
When switched on the display will show 0.00 and the Auto symbol, flashing
intermittently.
Step 4
Press & hold in both the Cook Period & End Time buttons together.
Step 5
With the Cook Period & End Time buttons still held in, press either the "+" or "-"
buttons to set the correct time of day.
Step 6
Release all the buttons simultaneously. THE TIME OF DAY IS NOW SET.
To change the time of day repeat Steps 4, 5 & 6 above.
Note: You cannot adjust the time of day if the timer has been set for an Auto Cooking Programme.
SETTING THE MINUTE MINDER
Step 1
Ensure the time of day is set correctly.
Step 2
Press and hold the Minute Minder button.
Step 3
With the Minute Minder button held in, set the required Minute Minder period using
the "+" and "-" buttons. A 'bell' symbol will light up.
Release all buttons and the timer display will revert back to the time of day. The 'bell' symbol
will remain lit to signify that a Minute Minder period has been set.
At the end of the set time an audible tone will be heard, and the 'bell' symbol will disappear.
Step 4
To cancel the audible tone press the Minute Minder button.
Note 1 When the Minute Minder has been set, the time remaining can be checked at any time by simply pressing
the Minute Minder button.
Note 2 If necessary the Minute Minder can be cancelled before the tone sounds by pressing and holding the
Minute Minder button and then at the same time pressing the "-" button until 0.00 appears in the display
window.
A
U
T
O
0 0 0
..
A
U
T
O
0 0 0
.
0 0 0
.
0 0 0
.
A
U
T
O
11
AUTO COOKING PROGRAMMES
There are two Auto Cooking programmes that can be selected using your timer:-
(a) To set the timer to switch the oven(s) On and Off Automatically
(b) To set timer to switch on immediately and OFF automatically after a set cook period.
a) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY
This allows you to cook at a specified time for a chosen period before the oven switches off
Automatically.
Step 1
Check that the correct time of day is set, if not follow instructions for setting the time of day.
Step 2
Place food onto the correct shelf position in the oven and close the oven door(s).
Step 3
Press and hold in the Cook Period button. The display will read 0.00 with the
'cookpot' symbol lit.
Step 4
With the Cook Period button still held in, set the required Cook Period using the "+"
and "-" buttons.
0 0 0
.
EN
EN
Summary of Contents for CH60EKKS
Page 1: ...CH60EKKS CH60EKWS...
