8
GB
Control panel
ON/OFF
Button
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Display Unit &
Selection Buttons
Key Lock
Button & Light
PROGRAMME
knob
Indicator
HEAT
LEVEL
Button & Lights
START/PAUSE
Button & Light
OPTION
Buttons & Lights
The
ON/OFF
button : If the dryer is running and this button is pressed and held for more that 3 seconds the dryer is
turned off, it counts down 3, 2, 1, Off and the programme is then cancelled. Press and hold for more than 3 seconds
and the dryer reactivates.
The
PROGRAMMES
knob sets the programme: rotate it until the indicator is pointing to the programme you want to
select
(see Start and Programmes).
The
OPTION
buttons select available options for your selected programme. The lights indicate that the option has been
selected.
The
START/PAUSE
button/light starts a selected programme. When you press this button there will be one beep
and the progress lights will flash to confirm the action. When a programme is running, pressing this button in pauses the
programme and stops the dryer. The light is green when programme is running, flashing amber if the programme has
been paused or flashing green if on standby waiting to start a programme.
The
Display
Unit
gives an indication of the drying or delay time together with icons that light to give warning information
and show the status of your programmes progress.
The three buttons below the display select ‘Automatic’ or ‘Timed Dry’ and if required a delayed start
(see Start and
Programmes or The Display).
The
Key
Lock
button/light
: Press and hold this button after selecting your programme and any options, the light
turns on. This prevents the programme settings from being changed. When the light is lit, the other buttons are disabled.
Hold the button to cancel and the light will go out.
The
Empty
Water
icon
: signals that the water container should be emptied. The display will take a few seconds to
update after replacing the empty water container, the dryer must be running for this to happen
(see The Controls).
Note
: If the water container fills the ‘water container full ‘icon flashes, the display shows “
H20
”, the heat is turned off
and your clothes will not dry.
The
Clean
Filter
icon
: gives a reminder before every programme, that it is essential to clean the filter every time the
dryer is used
(see Maintenance and Care).
The
Clean
Condenser
icon
: gives a reminder that it is essential to clean the condenser at regular intervals
(see
Maintenance and Care).
