EN
11
11
Wash options
!
If the selected option is not compatible with the selected
wash cycle, this incompatibility will be signalled by the
flashing of the indicator light and a sound alert
(3 beeps); the option will not be activated.
!
If the selected option is not compatible with another option that
has been selected previously, the indicator light corresponding
to the first option selected will flash and only the second option
will be activated; the indicator light corresponding to the button
will remain lit in a constant manner.
Super Wash
This option offers a high-
performance wash due to the
greater quantity of water used
in the initial phase of the cycle,
and due to the increased wash
cycle duration, is particularly
useful for the removal of
stubborn stains. It can be
used
with
or
without
bleach. If
you desire bleaching, insert the
extra tray compartment (
3
) into
compartment
1
. When pouring
in the bleach, be careful not to exceed the “max” level
marked on the central pivot
(see figure).
To bleach laundry
without carrying out a full wash cycle
, pour the bleach
into the extra compartment
3
, select the “Rinse” cycle
and activate the “Super Wash” option .
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is used
with a full load of washing, or when a large amount of
detergent is required.
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the Washer-dryer drum will
rotate slowly
; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
Note
: If you also want to run the drying cycle, this option is
enabled only if combined with level “
Iron
”.
Time Saver
If you select this option, the wash cycle duration will be
reduced by up to 50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
3
1
2
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this value will then be shown on the display.
Wash cycles and options
Table of wash cycles
Icon Description of the wash cycle
Max. temp.
(°C)
Max.
speed
(rpm)
Drying
Detergent and additives
Max.
load
(kg)
Cycle
duration
Pre-
wash
Wash Bleach
Fabric
softener
Cotton
Coloureds
:
lightly soiled whites and delicate colours.
40°
1400
-
11
Synthetics
Resistant
60°
800
-
5
Whites
60°
1400
-
-
6
Coloureds
40°
1400
-
6
Darks
30°
800
-
-
6
Wool
Platinum Care
:
for wool, cashmere, etc.
40°
800
-
-
2,5
Ultradelicates
30°
0
-
-
1
Anti Allergy
60°
1400
-
-
6
Rinse
-
1400
-
-
11
Spin
and
Pump out
-
1400
-
-
-
-
11
Wash&Dry
30°
1400
-
-
1
Drying Cottons
-
-
-
-
-
-
7
Drying Wool
-
-
-
-
-
-
2,5
Drying Synthetics
-
-
-
-
-
-
5
Cotton
Hygiene Prewash
(Add detergent to the relevant compartment).
90°
1400
-
11
Cotton
Whites
(1):
heavily soiled whites and resistant colours.
60°
(Max. 90°C)
1400
-
11
(*) The duration of the wash cycles can be checked on the display
.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
For all Test Institutes:
1) Test Programmes according to SASO 2692.2007/2693.2007: set wash cycle
with a temperature of 60°C + antifoam.
