HOTONE
“Skyline” Series Stompboxes
WALLY
Owner’s Manual
THANK YOU FOR PURCHASING A
HOTONE
PRODUCT!
Wally is a mini loop station which can record up to 15 minutes of loop phrases
in one storable memory. It also has separate input/output level controls and a
tempo
variation
function.
Operating Instructions
OPERATION
FUNCTION/STATUS
LED DISPLAY
Power on (no data)
Empty
None
Power on (with data)
Stop
Green LEDs flash
Tap footswitch (no data)
Record
Red LEDs light up
Tap footswitch when
recording/overdubbing
Play
Green LEDs light up
Tap footswitch when playing
Overdub
Red LEDs light up
Hold footswitch when playing
Undo/Redo (last recording)
Green LEDs flash fast
Tap footswitch twice when
playing/recording/overdubbing
Stop
Green LEDs flash
Hold footswitch when stopped
Delete
Green LEDs flash fast
Turn up the TEMPO when
playing
Speed up
Green/Red LEDs flash
successively at higher speed
Turn down the TEMPO when
playing
Slow down
Green/Red LEDs flash
successively at lower speed
Recording (
around
15 minutes)
Memory nearly full
Red LEDs flash
※
LEDs will flash once at the loop end.
※
Overdub cannot be operated during tempo variation, you must turn the
tempo back to the original speed (TEMPO knob pointing to center position)
to resume overdubbing.
※
Red LEDs will flash for a while when memory space is going to run out.
When the loop time reaches the limit, recording will stop and turn to
playback.
※
Undo/Redo are limited to 10 times within a single loop cycle.
