2
HHB5i 11/12/13
1.
List of Components
2.
Component Identification and Installation
Your Hothouse Stove comes packed in a cardboard box. Carefully remove any straps and remove all
cardboard and any plastic packaging, open the door and remove all the contents. See List of
Components section and check contents carefully.
•
Remove the coal catcher by lifting it up and rotating it until it can be removed through the open door
of the stove
•
Now lift up the grate and remove it from the stove.
•
Also remove the ashpan and its contents from the stove.
•
Secure the fixing bar and the tightening screw to the stove as shown in fig. 2. Do not put on the
wingnut until the stove is in place.
•
Place the insert stove into position and mark the intended position of the fixing screw in the fireplace
through the hole in the base of the appliance. Remove the stove, drill a hole and insert the rawl plug
supplied. Re-position the stove and screw into place.
Fig 2 – HHB5i Stove Assembly and controls
Description of Parts
Qty
HHB5i Stove Assembly
1
Tool
1
Ash Pan
1
Fixing bar
1
Bag containing fixings
1
Stove Operating Glove
1
Touch up paint
1
Spare rope
1
Warranty Card
1
Fig 1 – Stove Tool
Summary of Contents for HHB5i
Page 15: ...14 HHB5i 11 12 13...
