35
Ties
(Hook and Loop)
III. Maintenance
The appliance must be maintained in accordance with the instruction manual and labels
provided. Consult with your local Hoshizaki Certified Service Representative about
maintenance service.
WARNING
• Only qualified service technicians should service the appliance.
• To reduce the risk of electric shock, do not touch the icemaker power switch or
control switch with damp hands.
•
Before Servicing:
Move the icemaker's power switch to the "OFF" position. Turn off
the power supply. Place the disconnect (if applicable) in the off position.
Lockout/Tagout to prevent the power supply from being turned back on
inadvertently.
•
CHOKING HAZARD:
Ensure all components, fasteners, and thumbscrews are
securely in place after any maintenance is done to the appliance. Make sure that
none have fallen into the dispenser unit/ice storage bin.
Fig. 20
Strap
Spout
Chute
Packing
Packing
Chute Insulation
Baffles
Bin Control Assembly Mount
Actuator
Shaft
Extruding
Head
Evaporator
Assembly
Reservoir
Proximity
Switch
Plate
Strap
Float Switch
Rubber O-Ring
(F-801 and larger)
Nylon Ring
(F-801 and larger)
Chute Bracket
Packing
(F-450)
Model Shown:
F-1001MAJ-C
