6
Front View
Label Layout CHC Series
CHC25, CHC30, CHC36
Product labels and Serial Plate
Product labels and serial plate locations on the equipment are shown in the illustrations below. The CHC label locations
are similar for all models, unless otherwise indicated.
Rear View
Manufactured by
HORST WELDING
MODEL NO.
SERIAL NO.
MADE IN CANADA
If labels need to be replaced:
• Be sure that the installation area is clean and dry.
•
Be sure temperature is above 50°F (10°C).
•
Determine exact position before you remove the backing paper.
•
Remove the smallest portion of the split backing paper.
•
Align the sign over the specified area and carefully press the small portion with the exposed sticky backing in place.
• Slowly peel back the remaining paper and carefully smooth the remaining portion of the sign in place.
• Small air pockets can be pierced with a pin and smoothed out using the piece of sign backing paper.
