48
60029922 • 1 • 09/2020 • en
10 Optional equipment
10.1 Crossbar
The crossbar is located in front of the coulter discs and levels coarsely ploughed soil.
It is hydraulically connected to its own control unit and can be adjusted while driv-
ing.
The hydraulic cylinders are connected in series on either side.
Ø
In order to assure synchronism of the cylinders and perfect adjustment of all
piston rods to the end stop, all cylinders should be completely extended before
starting work.
Ø
The angled plate can be adjusted to the intended aggressiveness. In case of
wear it can be renewed or readjusted:
CAUTION
Exceeding the permissible transport width. Risk of damages.
Ø
Swing the crossbar fully up before transport travel.
