Operation | 6
60029922 • 1 • 09/2020 • en
37
4. Disconnect hydraulic lines, electric connections and ISOBUS connection and
store in hose compartment.
5. Relieve and uncouple the upper link.
6. Uncouple the tractor link arm and lower it.
7. Depressurise the hydraulic lines, unplug and store them in the hose compart-
ment.
8. Remove the hose assembly from the front implement.
6.2 Folding
WARNING
Serious crushing due to lowering / dropping machine parts
Ø
No persons may stay under raised machine parts.
Ø
Order persons to leave the danger zone around the machine. Make sure be-
fore folding that no persons are present in the danger zone.
Ø
Comply with the accident prevention instructions.
WARNING
Risk of accident due to insufficient stability
Ø
Fold the machine only after it has been fully connected.
Ø
The machine must not be in an inclined position when folding it.
Ø
Fold the machine only on a level and firm surface.
CAUTION
Damages to the machine
Ø
Before folding in clean the area around the folding joints and the associated
hydraulic cylinders.
Ø
Raise the machine and unfold it fully.
Ø
Raise the machine until the bottom edges of the tools and coulter have a dis-
tance of at least 40 cm to the ground.
Ø
Fold in the machine completely.
